• Z distance
• Support wall loops
• Base Pattern
  • Base pattern spacing
• Pattern angle
• Interface layers
• Interface pattern
• Interface spacing
• Normal support expansion
• Support/object XY distance
• Support/object first layer gap
• Don't support bridges
• Independent support layer height

The Z gap between support interface and object.

This setting specifies the count of support walls in the range of [0,2]. 0 means auto.

Line pattern for the base of the support.

Spacing between support lines.

Use this setting to rotate the support pattern on the horizontal plane.

The number of interface layers.

The pattern used for the support interface.

Spacing of interface lines. Zero means solid interface.

Expand (+) or shrink (-) the horizontal span of normal support.

XY separation between an object and its support.

XY separation between an object and its support at the first layer.

Don't support the whole bridge area which make support very large. Bridges can usually be printed directly without support if not very long.

Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time. This option will be invalid when the prime tower is enabled.