imsai8080 - Maverick-Shark/retroGuru GitHub Wiki

Cores

HowTo

Typical usage sesion:

  • Set the address switches to the address F800 (pressing 1,2,3,4,5)
  • Press EXAMINE to jump to that address (key A). You should see the value F3 on the data bus.
  • Press RUN to start running at the current examined address (key F). The console should show the MEMON/80 banner.
  • Mount a bootable disk on drive 0, and boot from the monitor (command BO). To do that you need to switch the keyboard to the console (Control-F1)

Instruciones

Méter la dirección F800 en el panel,
Pulsando las teclas 1, 2, 3, 4 y 5.
Eso activa los cinco bits altos (Address Bus).
Luego EXAMINA (letra A) y EJECUTA (letra F)

Debería salir el prompt:

Nemon/80 3.06 by M.Eberhard
RAM: FF8F
>

CP/M Commands

A> stat dsk:

Links