Resources for building your own MaslowCNC - MaslowCNC/Mechanics GitHub Wiki

Here are links to the Build of Materals (BOM) for the Mechanical and electrical elements of a MaslowCNC:

• https://github.com/MaslowCNC/Mechanics/wiki/DIY-Kit-Mechanical-Equivalent-Parts
• https://github.com/MaslowCNC/Electronics/wiki/DIY-PCB-Parts-List

Here is some info on the Z Axis Motor -

A copy of the data sheet is here:

• https://github.com/MaslowCNC/Electronics/blob/master/Documentation/Data%20Sheets/ET-SGM37FE-1222(20170810003-H16035)%20Model%20(1).pdf

which might help. If you find a similar motor with a different connector on the motor side it will work, you will just need to make a cable to connect to the Arduino Shield. On the Arduino Shield side the connector is a JST XH connector.

Here is a page with some helpful suggestions when assembling your own DIY board.

• https://github.com/MaslowCNC/Electronics/wiki/Notes-&-suggestions-on-building-a-DIY-board