DIY Kit Mechanical Equivalent Parts - MaslowCNC/Mechanics GitHub Wiki
MaslowCNC Wiki: Electronics | Firmware | Mechanics | Software| Community Garden
The Following is a list of hardware parts and fasteners equivalent to those included in the MaslowCNC Kit.
| Part Name | Notes | PartNumber | Source | QTY |
|---|---|---|---|---|
| Cup Hook | 9585T1 | McMaster | 8 | |
| 1.5mm Pully | 3083T14 | McMaster | 6 | |
| S-hooks | 9381T23 | McMaster | 2 | |
| Idler Sprocket | 6663K11 | McMaster | 2 | |
| Drive Sprocket | 10T #25 roller chain with 8mm shaft | B07KXK83SD | Amazon.com | 2 |
| Motor/Gearbox/Encoder | (291:1 reduction gearbox with worm gear to prevent back driving motor, 30kg/cm torque, 20 rpm, 12 volts) | ET-WGM58A-1260 | Etonm | 2 |
| Motor Mount | Search terms "WORM GEAR MOTOR MOUNTING BRACKET FOR GW31ZY OR GW370" | http://alexnld.com or Amazon.com | 2 | |
| 2.5"x3" U-Bolt | 3201T35 | McMaster | 2 | |
| Chain Bracket | 2 | |||
| Chain Bracket Bolt | 2 | |||
| Cotter Pin | 98335A069 | McMaster | 4 | |
| Wood Screw | 25 | |||
| Stretchy Tensioning Cord | 8858T5 | McMaster | 3 Meters | |
| #25 Roller Chain | 6261K171 | McMaster | 2 | |
| M4x8 Screws | Used to mount motor to bracket | 94500A226 | McMaster | 8 |
Approximate cost of above supplies (minus the chains) on 8/11/18 is $160 from Mcmaster. The chains from Mcmaster are over $100. I recommend buying them off ebay for abobut $20 instead.