AEG MF 1400 KE - MaslowCNC/Mechanics GitHub Wiki
MaslowCNC Wiki: Electronics | Firmware | Mechanics | Software| Community Garden
AEG MF 1400 KE
| Feature | Value |
|---|---|
| Model # | MF 1400 KE |
| Cost (approx) | 300 € |
| Colet size | 8 / 12 mm |
| Ease of attaching Z-axis | Easy |
| Shaft connector size | 3/8 in |
| Variable speed (y/n) | Yes |
| Illuminated (y/n) | Yes |
| Dust collector (y/n) | Yes |
Pros:
Available in EU. Comes with additional plunge base. Exactly the same specs as the Ridgid R2200 just rebranded. Used by dev team so well supported
Cons:
Slightly expensive as it comes from the same assembly line as the R2200
General comments:
AEG Combo router (MF-1400-KE), Cheapest option so far: www.rotopino.de
The RPM can go in between 10.000 and 23.000
Speed recommendations (from the manual)
- 3-6 mm HSS (SoftWood>23000) (HardWood>20400) (Plastics>15200) (ALUMINIUM>15200)
- 6-8 mm HSS (SoftWood>20400) (HardWood>17800) (Plastics>15200) (ALUMINIUM>12600)
- 8-10 mm HSS (SoftWood>17800) (HardWood>15200) (Plastics>12600) (ALUMINIUM>10000)
- 10-12 mm HM (SoftWood>17800) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 12-20 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 20-25 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)
- 25-40 mm HM (SoftWood>15200) (HardWood>12600) (Plastics>10000) (ALUMINIUM>10000)