Manual

Digital Console for Live and Studio with 40 Input Channels, 32 MIDAS Microphone Preamplifiers and 25 Mix Buses

Mixer Scenes (presets):

MCT Default Teaching Scene Autumn 2020 (Oslo, with Zoom patched into Lola)

Spatial Audio Scene Autumn 2020 (Oslo)

• 4 microphones connected to input channel 1-4 on the back of the mixer.
• You find these on input strip 1-4 on the left side of the working panel.
• All The microphones in use is condencer microphones, and need phantom power (48V).
• A mini-jack aux cable is connected to aux input 1 and 2 on the mixer. This is routed to bus 6, 7 and to left/right.
• The master left/right outputs goes to two of the monitor speakers in the control room in Trondheim.
• Input channel 1-4 is each sent on bus 5 and 6 (going to Tico), and to 7 and 8 (to the soundcard on Lola computer)
• Input 5, 6 (from Tico) and 7, 8 (from the Lola computer soundcard) are routed to the master left/right channels.
• The output of bus 7 and 8 you can find on the right side of the mixer and has to be unmuted.
• Bus 7 and 8 has its hardware output on the back of the mixer, these go into the sound card of the computer.
• The same goes for Bus 5 and 6 which goes to a Blackmagic audio-to-SDI and then to Tico.