Assembly Legs - MARSLab-UTRGV/Drone-Manual GitHub Wiki

STEP 1:

Collect the necessary parts to assemble a leg:
1)
2)
3)

STEP 2:

Insert the connector and padding into the thin carbon fiber tube.

STEP 3:

Insert the thicker carbon fiber tube into the connector.

STEP 4:

Insert the XX screws and the single XX screw and nut into their respective slots.

STEP 5:

Attach the base connector to the other side of the carbon fiber tube.

STEP 6:

Attach the XX screw into the base connector as shown.

STEP 7:

Attach the XX screws into the base connector as shown.

STEP 8:

Attach the XX screws into the base connector as shown.

STEP 9:

Repeat the same steps to assemble and attach the other leg.

STEP 10:

Screw in four M3*14 screws with the nylon standoffs into the positions above.