Getting Started

So you want to have yourself a pair of working VR Haptic Gloves?
Here's what you'll need to do.

Parts

First, you'll need to buy/have the correct parts. Here's what you'll need to order:
For Prototype 3 (Just finger tracking)
For Prototype 4 (Tracking and Haptics)

3D Printing

Next, you'll need to 3D print the plastic parts needed to put it together. Here's how:
For Prototype 3
For Prototype 4

If you don't have access to a printer, you can ask around in our Discord Server.
There are people that may be able to send parts or alternative designs that don't require printers.

Assembling

Next, you can build the glove. Here's how:
For Prototype 3
For Prototype 4

Wiring

Next, you'll have to wire up the electronics. Here's how to do that:
For Prototype 3
For Prototype 4

Software/Firmware

Next, you can flash the firmware onto your glove to make it work.
Here's how to do that.

Once you're done with that, your glove should be functional. Now all you need to do is install and configure the OpenGloves driver to use it in VR.

Additional Support

You can get great support on any issues in our Discord Server.

Other great resources:
TheMysticle's Video