Relay software stack

The main file of the relay fw project is available here : https://github.com/LoRaWanRelay/LoRaWanRelay/blob/master/UserCode/MainRelay.cpp
By default the Makefile is configured in Relay Mode for running over a STMicroelectronics Discovery Kit CMWX1ZZABZ.

To compile the source code , you have to install the free gcc-arm-none-eabi package (working both on linux and windows : https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads).

To Compile source code : make clean all The Binary file is available in the repository /build/MiniMouse.bin

Sensor software stack

The main file of the Sensor code is also available at : https://github.com/LoRaWanRelay/LoRaWanRelay/blob/master/UserCode/MainRelay.cpp
To switch from relay code to sensor code you have to select a compilation option in the Makefile (set variable RELAY to 0).

To Compile source code : make clean all

The Binary file is available in the repository /build/MiniMouse.bin

MakeFile Options

• BOARD_MURATA = 1To Select the Murata Board as Hw Target Platform
• RELAY = 1To Activate the Relay FW (set 0 for Sensor Fw )
• BOARD_WITH_SENSOR = 0 To Select BezLoc Board
• BOARD_L4 = 0 To Select Nucleo Board L4 (not fully tested up to now)
• RADIO_SX1276 = 1 To select Radio Sx1276
• RADIO_SX1272 = 0 To Select Radio Sx1272 ( Not Yet Fully Implemented Cad Not Tested)
• RADIO_SX126x = 0 To Select Radio Sx126x ( Not Yet Fully Implemented Cad Not Tested)
• DEVICE_UNDER_TEST = 1 Set To One for Relay Demo
• RADIO_WITH_TCX0 = 1 Set To One if radio Board embeds a TCXO