Lab 6‐3: Classful Subnetting - Lillian-Griffiths/NET-150 GitHub Wiki

In this lab, I created five subnets representing Skiff, Foster, Joyce, and the connections between skiff/foster and skiff/joyce. We used RIP to allow connectivity between routers.

During this lab, I came across a number of difficulties. The main issues was that even with RIP configured, I could not communicate out of the network. This was solved by switching the serial cable to a crossover cable, and then back to a serial cable, with no other configuration changes.

Additionally, packet tracer was loading too many commands at once in simulation mode. This was solved by creating a new scenario and deleting the old one.