Tweaks - LTVA1/klystrack GitHub Wiki
Settings to modify if the audio is skipping
The default settings should be good for most cases but in case the audio seems to skip or you notice a significant delay, you can try changing the following values in the config file (~/.klystrack
on Linux, the file is located in your user folder on Windows).
Note: You need to run klystrack once to create the config file.
Mix rate
mix_rate
sets the mixing rate, i.e. how many samples there are in a second. The bigger the value, the better quality the sound has. The default is 44100 (44.1 KHz). Note that changing mix_rate
most likely has an effect on the filter output.
Buffer length
If the sound is skipping, you can try raising the mix_buffer
parameter which sets the length of the chunk audio is processed. A bigger buffer results in less overhead. A big buffer also creates an audible delay. The default is 2048 which results in 2048 / 44100 = .046
seconds (46 ms) of delay.