Doubts - Kushagram/wireless-testbed GitHub Wiki

Post Experiment Analysis

I have run my experiment but now I am facing a major hurdle in order to tabulate the output that I get from my experiment i.e. I need to run the experiment where uplink and downlink packet sizes are both 1000 bytes but uplink packet rate should change in the following manner:

• 50 pkts/sec
• 100 pkts/sec
• 150 pkts/sec
• 200 pkts/sec

At the same time downlink packet rate should change in the following manner:

• 150 pkts/sec
• 300 pkts/sec
• 450 pkts/sec
• 600 pkts/sec

Hence in all I want to run the experiment with four sets of parameters as mentioned above each being run 5 times.

The problem that I am facing is how to write a script and where to write it in order to collect the desired outputs in a tabular form.Once the script is written how to retrieve the data.

I would be highly obliged if you would give a detailed explanation because I believe that this post experiment analysis is of prime importance.

I had tried to paste the following command on another tab as mentioned on orbit-site for post experiment analysis:

http://console.outdoor.orbit-lab.org:5054/result/dumpDatabase?expID=default_slice-2017-6-28t01.26.35.330-04.00

But I got the following output:

--

-- Database Dump

-- Experiment ID: default_slice-2017-6-28t01.26.35.330-04.00

--

ERROR: Database /var/lib/oml2/default_slice-2017-6-28t01.26.35.330-04.00.sq3 does not exist on this OML server