In this session, we'll get to know how to assemble every part together.

1. Get rid of the supports

You might find some support on the printed case on the supporting column, please carefully get rid of it.

You can use a cutting plier to cut.

2. Put on the breadboard

You should find a little dented square, it should have the same size as the breadboard. Tape or glue your breadboard in the exact place.

You can also cut the head of an extra jumper wire (if you have an extra one) ans tape it as the image shows to hold the MPU6050 more stable.

Plug the MPU6050 into the breadboard as the image shows.

Please make sure the direction is correct.

Note

An unknown error might appear when you connect the INT to the ESP32.

If your QuakeCord suddenly stops working about 30 minutes after you plug in, remove the connection of this pin.

note that a breadboard connects like this, the pins in the same box are connected.