command uci - KerwinKoo/KerwinKoo.github.io GitHub Wiki

openwrt uci命令行管理无线

配置有线

设置lan ip(即访问路由的ip)

uci set network.lan.ipaddr=[lan ip]

pppoe用户

uci set network.wan.proto=pppoe    #设置wan口类型为pppoe
uci set network.wan.username=[上网帐户]
uci set network.wan.password=[上网密码]    #这两行设置pppoe用户名和密码

如果要挂在上级路由下面就这样

uci set network.wan.proto=none    #关掉wan
uci set network.lan.gateway=[上级路由ip]    #网关指向上级路由
uci set network.lan.dns=[上级路由ip]    #dns指向上级路由
uci set dhcp.lan.ignore=1    #关掉lan的dhcp

配置无线

uci set wireless.@wifi-device[0].disabled=0    #打开无线
uci set wireless.@wifi-device[0].txpower=17    #设置功率为17dbm 太高会烧无线模块
uci set wireless.@wifi-device[0].channel=6   #设置无线信道为6
uci set wireless.@wifi-iface[0].mode=ap    #设置无线模式为ap
uci set wireless.@wifi-iface[0].ssid=[自己设置SSID]   #设置无线SSID
uci set wireless.@wifi-iface[0].network=lan   #无线链接到lan上
uci set wireless.@wifi-iface[0].encryption=psk2 #设置加密为WPA2-PSK
uci set wireless.@wifi-iface[0].key=[密码]   #设置无线密码

应用配置

uci commit    #应用
/etc/init.d/network restart   #重启网络服务
Add a custom footer
⚠️ **GitHub.com Fallback** ⚠️