Before starting this lab I opened the Options menu, went to misc, set the Auto File Backup Interval to 1 minute, and saved my file as NET-330-Lab-4-1-Jaden

---

Subnet table:

VLAN	VLAN_NAME	Hosts Needed	Network	Netmask	Host range
100	Clinic	300	10.4.0.0	/23	10.4.0.1 - 10.4.1.254
110	Visitor	300	10.4.2.0	/23	10.4.2.1 - 10.4.3.254
200	Office	300	10.4.4.0	/23	10.4.4.1 - 10.4.5.254
210	Counseling	150	10.4.6.0	/24	10.4.6.1 - 10.4.6.254
1	Default	150	10.4.7.0	/24	10.4.7.1 - 10.4.7.254

***

This is the design of my workspace before connecting anything or assigning IPs

---

To start the connection process I added all of the VLANs listed on the table above to all of the routers.

After that I added trunk ports to Noth, South, and Data Center Cores

fa0-6 are assigned to Clinic on each wing fa7-10 are assigned to Visitor on each wing fa11-17 are assigned to Office on each wing

---

DHCP Server setup:

PC properly getting IP address via DHCP

I then added another PC to the south router and made sure that it too was able to connect through DHCP

And then I ran a ping between the north and south PCs

I then set up my DNS server with the IP address of 10.4.6.3 and made sure It worked on both PCs:

---

These are the updated DHCP settings the DNS IP should be the same between every single server

These are the DNS settings:

Resolving ping by name:

PC0:

PC1: