Small Enterprise Class Lab - JadenGil/Jaden-Tech-Journal GitHub Wiki

After getting everything plugged in and pulling it up on PuTTY we reset the routers to wipe any previous information that might've been on there.

We then named the main switch North-West-Wing-SW

The switches VLAN IP is 192.168.10.1 255.255.255.0

West admin IP address is 192.168.11.1 255.255.255.0

The two PCs boot into Linux

---

show run will show you what the current interface is

---

once we enabled GigabitEthernet2/0/1 to be on VLAN 110 and set the IP to 192.168.11.1 we did a quick ping between the machine and the switch to make sure they were properly connected and it worked.