Lab 5 1 - JadenGil/Jaden-Tech-Journal GitHub Wiki
Before starting this lab I opened the Options menu, went to misc, set the Auto File Backup Interval to 1 minute, and saved my file as NET-330-Lab-4-1-Jaden
Subnet table:
| VLAN | VLAN_NAME | Hosts Needed | Network | Netmask | Host range |
|---|---|---|---|---|---|
| 100 | Clinic | 300 | 10.4.0.0 | /23 | 10.4.0.1 - 10.4.1.254 |
| 110 | Visitor | 300 | 10.4.2.0 | /23 | 10.4.2.1 - 10.4.3.254 |
| 200 | Office | 300 | 10.4.4.0 | /23 | 10.4.4.1 - 10.4.5.254 |
| 210 | Counseling | 150 | 10.4.6.0 | /24 | 10.4.6.1 - 10.4.6.254 |
| 1 | Default | 150 | 10.4.7.0 | /24 | 10.4.7.1 - 10.4.7.254 |
This is the design of my workspace before connecting anything or assigning IPs
To start the connection process I added all of the VLANs listed on the table above to all of the routers.
After that I added trunk ports to Noth, South, and Data Center Cores
fa0-6 are assigned to Clinic on each wing fa7-10 are assigned to Visitor on each wing fa11-17 are assigned to Office on each wing
DHCP Server setup:
PC properly getting IP address via DHCP
I then added another PC to the south router and made sure that it too was able to connect through DHCP
And then I ran a ping between the north and south PCs
I then set up my DNS server with the IP address of 10.4.6.3 and made sure It worked on both PCs:
This is the updated DHCP settings the DNS IP should be the same between every single server
This is the DNS settings:
