meeting 2024 02 28 n315 - JacobPilawa/TriaxSchwarzschild_wiki_5 GitHub Wiki
Context
-
I've run three lines of models following our last meeting.Specifically, I ran:
- phi = 85, line of theta
- theta = 85, line of phi
- phi = 5, line of theta
-
In these tests, I've fixed the other parameters near the minimum, with BH = 3e9, ML = 2.57, rho0 = 3.3e9, and psi = -88.835.
-
Note that originally I had spanned the full range (0,90) in these parameters (33 models each line), but some of these were non-deprojectable.
-
The results below seem to indicate to me that the high theta, high phi corner is preferred over the spurrious minimum we saw at low theta.
| Lines of Theta | Lines of Phi | Crossed |
|---|---|---|
| [images/240228/lines_of_theta.png]]](/JacobPilawa/TriaxSchwarzschild_wiki_5/wiki/[[images/240228/lines_of_phi.png) | images/240228/both.png |
Enclosed Light Profile
- Here's a comparison of the enclosed light profiles for the three MGE's for N315:
| PLOT |
|---|
| images/240228/test.png |
| images/240228/test_rho.png |
