Setup Arduino IDE and ESP32 - IoTThinks/EasyLoRaGateway_v2.1 GitHub Wiki
1. Install Arduino IDE
-
Go to https://www.arduino.cc and download the latest Arduino IDE. Click "Just download" to get the installation file.
-
Let everything default and finish installing the Arduino IDE
Ok, click Install to install COM driver for Arduino IDE. Total is 4-5 times for many kinds of drivers.
Done.
2. Install library for ESP32
We need to install ESP32 library for this board as it uses ESP32 as the core processor. ESP32 controlls GPIO, WiFi, BLE and even SPI for LoRa.
Original instruction is at https://github.com/espressif/arduino-esp32
-
Put in stable release link into File > References > Settings > Additional Board manager URL > Click the icon and fill in the link in A NEW LINE https://dl.espressif.com/dl/package_esp32_index.json
-
Open Tools > Boards > Board Manager
-
Search for ESP32 and click Install
-
Now open Arduino IDE, click Tools > Board > (scroll down) ESP32 Dev Module. If you see a lot of ESP32 boards, you've DONE successfully.
-
Reboot Arduino IDE.
Done.