Connect all hardwares - IoTThinks/EasyLoRaGateway_v2.1 GitHub Wiki
1. Connect every parts together
Put in every parts as in the following picture.
- Put in 5v power adapter
- Put in RJ45 ethernet cable. When the gateway obtains an IP, it will sound 3 beeps.
- Put in RJ45 UART USB for uploading sketch and debugging.
Don't misplace the Internet cable and UART Console cable. They are not compatible with each other.
2. Attach everything together
2.1 Ra02 and RFM95W version
2.2 RFM95W version
For RFM95 version, you can upload your code via UART USB (besides UART RJ45)
- Put in 5v power adapter
- Connect DTR/RST, GND, RXD, TXD and RTS of UART USB to DTR, GND, TXD, RXD and RTS of gateway.
UART USB
Attach UART USB into Easy LoRa gateway v2.1 RFM95