MultiPlug Extensions - Industry4/SMEMA-Hermes-Adaptor GitHub Wiki

Out-the-box and included on the operating system software image will be a set of MultiPlug Extensions with some default recipes. You can always install other Extensions to increase functionality of your MultiPlug installation on the Adaptor.

MultiPlug.Ext.Hermes

• Creation of Lanes, by default Quentin has 1, Austin has 2.
• All Hermes Standard Configurations
• Monitoring App for production line operators

MultiPlug.Ext.Network.Sockets

• Network Socket Endpoints and Clients
• Sets the IP Address of Up and Downline hermes equipment of both lanes if applicable

MultiPlug.Ext.RasPi.GPIO

• Access to the hardware I/O of the Adaptor. In most situations this will not need to be changed. For solution engineers only.

MultiPlug.Ext.RasPi.Config

• Setting of network host names
• Setting of the Adaptor IP Address
• Displays the resources of the Adaptor

MultiPlug.Ext.SerialPort

• Read and Write to the Adaptor's serial port. Useful for Conveyor integration and Barcode scanning.