6. VIRTUAL IMPLEMENTATION - I-Division-2021-2022-Even/Repo-10 GitHub Wiki
3D MODELING:-
CIRCUIT DIAGRAM:-
Sensing Subsystem:-
Launching Subsystem:-
Display and Sound Subsystem[with RTC(Real Time Clock) Module]:-
Integration of all subsystems:-
FLOW CHART:-
Display Unit:-
Launching Subsystem Flowchart:-
Sensing Unit
Flowchart of entire subsystem:-
BILLS OF MATERIALS (BOM):-
DISPLAY UNIT
Sl. No | Part Name | Materials with which the part is made up of | Description about part | Quantity required | Fabrication Process if needed | Price |
---|---|---|---|---|---|---|
1. | Clock Body | Foam sheet(front side part) | 30cm X 14cm X 0.5cm | 2 | Cutting | - |
Foam sheet(top side part) | 30cm X 20cm X 0.5cm | 2 | Cutting | - | ||
Foam sheet(right side part) | 19cm X 14cm X 0.5cm | 2 | Cutting | - | ||
2. | 20x4 LCD I2C Display | 1 | - | Rs. 575 | ||
3. | Push Button switch(12mm) | 4 | - | Rs. 49 |
LAUNCHING UNIT
Sl. No | Part Name | Materials with which the part is made up of | Description about part | Quantity required | Fabrication Process if needed | Price |
---|---|---|---|---|---|---|
1. | DC Motor | 2 | - | Rs. 80 | ||
2. | 2 Channel 12V Relay Module | 1 | - | Rs. 171 | ||
3. | Bottle caps | To launch the balls | 2 | |||
4. | Cardboard | For making launcher base |
SENSING UNIT
Sl. No | Part Name | Materials with which the part is made up of | Description about part | Quantity required | Fabrication Process if needed | Price |
---|---|---|---|---|---|---|
1. | IR Sensor | Used for object detection | 4 | Rs. 35 |
Entire System
Sl. No | Part Name | Materials with which the part is made up of | Description about part | Quantity required | Fabrication Process if needed | Price |
---|---|---|---|---|---|---|
1. | Clock Body | Foam sheet(front side part) | 30cm X 14cm X 0.5cm | 2 | Cutting | - |
Foam sheet(top side part) | 30cm X 20cm X 0.5cm | 2 | Cutting | - | ||
Foam sheet(right side part) | 19cm X 14cm X 0.5cm | 2 | Cutting | - | ||
2. | 20x4 LCD I2C Display | 1 | - | Rs. 575 | ||
3. | IR Sensor | Used for object detection | 4 | Rs. 35 | ||
4. | Arduino Mega 2560 | to integrate various actuators | 1 | Rs. 2011 | ||
5. | DS3231 RTC Module Precise Real Time Clock I2C AT24C32 | 1 | Rs. 349 | |||
6. | Push Button switch(12mm) | 4 | - | Rs. 49 | ||
7. | Breadboard | 1 | - | Rs. 149 | ||
8. | Resistor 221 ohm | 1 | - | Rs. 59 | ||
9. | Piezo Buzzer | 1 | - | Rs. 55 | ||
10. | DC Motor | 3 | - | Rs. | ||
11. | 2 Channel 12V Relay Module | 1 | - | Rs. 120 | ||
12. | Bolts | - | ||||
13. | Nuts | - | ||||
14. | L Clamps | 12 | - | |||
15. | Bottle caps | To launch the balls | 2 | |||
16. | PVC pipe | For making launcher |
MOTOR AND BATTERY SIZING OF THE SYSTEM:-
MOTOR SIZING FOR LAUNCHING
Mass=2.7g
Force required (Ignoring value of g)=mg= 2.7g
Factor of safety= 1.5
Total Torque= 5.263 g/cm
3D MODEL:-
3D MODEL OF ENTIRE SYSTEM
LAUCHING AND RELOADING SUBSYSYTEM
SENSING SUBSYSTEM
ALARM BOX