Intro:-

Today everyone uses their phone as an alarm clock. But the waking up rate by using phone as an alarm clock is less when compared to a normal alarm clock. This rolling alarm clock forces us not to go back to bed after shutting off the alarm sound.

Components required:-

<style> </style>

Component name	Price(in Rs.)
RaspberryPi (Preferably Model B or B+)	3149.00
Brick-Pi	10763.05
Brick-Pi Power Pack	7665.77
SD card with Raspbian Wheezy installed	1552.00
Wi-fi Dongle	329.00
1 Small Speaker (such as the X-Mini 2)	399.00
2 LEGO Mindstorm Motors	2776.00
2 LEGO Mindstorm Touch Sensors	1169.00
2 LEGO Wheel	141.60
LEGO beams and pins to construct the robot platform	---

:

Clocky is the alarm clock that rums away beeping , to get you out of the bed. Clocky never lets us oversleep again. As soon as we hit the snooze button, the Clocky runs away ready to sound its alarm for a second time. The idea is that you have to get out of bed to chase it to switch off the alarm. So no second snooze .Alarm clock has wheels that turn so the clock rolls off the nightstand or counter and across the floor while the alarm is sounding. https://en.wikipedia.org/wiki/Clock

• 2-PIN CONNECTOR(BATTERIES) - 279

• PRINTED CIRCUIT BOARD WITH LEAD -

• FOUR CONNECTORS

• 2-PIN CONNECTOR(SPEAKER)

• MAGNET

• 4-PIN CONNECTORS(2 ELECTRIC MOTORS)

• GEARS(HELPS FOR WHEELS)

• SMALL HORIZONTAL SLITS(WEIGHTS)

This is an Alarm Puzzle Clock which means there is a little memory game you have to solve to stop the alarm from ringing! In a summary, this clock is for those who is being snazzy in the mornings. It has 3 LEDs and when you press any of the buttons, the alarm will be silenced and 3 LEDs will give you a random pattern and one minute to enter it. You need to use rotary encoder (ec11) to adjust and press it's button to settle it. At the first start, it will wait you to adjust clock's hour and then minute. When you adjust that, the clock will start to work and you will be allowed to adjust the alarm. Every time you pressed the encoder's

• 2 Arduino Pro Mini – Rs. 1000

• Red, green, and blue buttons – Rs.137

• Red, green, and blue led – Rs. 6

• EC11 Rotary encoder – Rs. 229

• Some cables

• Stripboard – Rs. 69

• Headers – Rs. 9

• 3D printed parts

https://www.instructables.com/Memory-Puzzle-Alarm-Clock/

This might be one of the coolest alarm clocks out there.A design which is truly clever and effective.If you are one of those who are deep sleepers and keep snoozing their alarms,then this is what you need.The UFO alarm clock will force everyone to get up!

• Arduino or Arduino standalone,RS.1500

• RTC DS1307 or DS3231,Rs.100

• 20x4 LCD I2C,Rs.300

• 4 buttons,Rs.20

• Diodo led

• 1 Resistor 220 ohm,Rs.2

• Piezzo Buzzer (from Arduino starter kit),Rs.1400

• Wires,Rs.20

---