Pairing the TAP with WinHue - Hyrules/WinHue GitHub Wiki

In order to pair a new tap with WinHue follow theses steps :

  1. Go to the bridge settings window and take a note of the Zigbee Channel.
  2. In the main window of WinHue press the search for new sensors button
  3. Go near the bridge (Within 1 meter) and press the corresponding button below for 10 seconds

Button 1 = channel 11
Button 2 = channel 15
Button 3 = channel 20
Button 4 = channel 25

  1. Wait for a minute and the tap should appear in WinHue.
⚠️ **GitHub.com Fallback** ⚠️