Guide: Setting up Repetier

Overview

In this guide we will do the following:

• Download and install Repetier
• Download Factory settings for Odin One
• Import an STL File
• Slice and Print

Getting Repetier

Start by downloading Repetier. https://www.repetier.com/download-software/

Note: Repetier will ask you if you would like to donate, if you do not, proceed to the bottom of the page to download without donating

Go through the installation process.

Once you have installed and opened Repetier move to the next step.

Odin One Factory Files

Now we will get the factory config files for the Odin One and add them to the slicer, these setting contain predefined settings tuned for your printer. Download the configuration bundle here. http://gofile.me/2K63U/SA3hTksKe

Upload Factory Bundle

In Repetier, navigate to the slicer tab.

Select Slic3r Prusa Edition

Click Configuration

This will open Slic3r Prusa Edition

In the Slic3r Prusa Edition window, navigate to **File > Load Config Bundle

Navigate to and select the Odin configuration bundle you downloaded earlier.

A dialog will appear confirming the settings were imported.

Close Slic3r Prusa Edition