Since these projects are involve some soldering I highly recommend to buy a soldering iron before starting assemble it! Personally I'm using a 10$ one from Aliexpress, but since I have to solder SMD parts for the PCBs I've ordered a Soldering station like in the picture 😄 Soldering Iron
Soldering Station 1
Soldering Station 2
Hot Air Soldering Gun

ESP12F/E
SMD 0805 resistors
SMD 0805 capacitors
AMS1117-3.3
2.54mm header
KF2510 4P Female
SMD0805 LED (red)
6x6x2.5 SMD button
MAX232 SOIC16
330uH Coil
6.3v 330uf Capacitor 6x7mm
100uF Capacitor 10x10.5
9032 SMD Buzzer
LM2575S-5.0

Prefix	Value	Package
R1	10K Ω	SMD 0805
R2	10K Ω	SMD 0805
R3	1K Ω	SMD 0805
R4	56 Ω	SMD 0805
C1	100uF	SMD 10x10.5
C2	100nF	SMD 0805
C3	10uF	SMD 0805
C4	100nF	SMD 0805
C5	330uF	SMD 6.3x7.7
L1	330uh	SMD 7.3x7.3 CDRH74
U1	LM2575S-5.0	TO263-5
U2	AMS1117-3.3	SOT223
U3	MAX232	SOIC-16
D1	1N5819	SOD-123F
Reset	SMD Button	4P L6.2 W6.2 P4.50 LS9.0
Debug	2.54mm 5P header	(optional)
Q2	2N7002	SOT23-3
B1	SMD Buzzer	SMD 9032
Status	SMD LED (red)	SMD 0805
ESP12E/F/S or ESP07S	-	-
OUT	Connector + Wire	KF2510 4P

---