Building Results - HoareLea/SAM_Tas GitHub Wiki
This section contains the building result variables that give the total load over all the output zones and the parameters for the outside conditions.
Heating Profile
The total heating load over all of the output zones in the building, irrespective of output selection [Unit: Watts].
Cooling Profile
The total cooling load over all the output zones in the building, irrespective of output selection [Unit: Watts].
Latent Addition Profile
The latent addition load over all of the output zones in the building, irrespective of the output selection [Unit: Watts].
Latent Removal Profile
The latent removal load over all the output zones in the building, irrespective of output selection [Unit: Watts].
Global Radiation
Total solar radiation intensity on a horizontal plane [Unit: Watts per square meter].
Diffuse Radiation
Diffused sky radiation intensity on a horizontal plane [Unit: Watts per square meter].
Cloud Cover
A number between 0 and 1, where 0 indicates clear sky and 1 indicates overcast conditions.
External Temperature
The outdoor dry-bulb air temperature as read from the model's weather data [Unit: degrees Centigrade]
External Humidity
The outdoor relative humidity as read from the model's weather data. [Unit: %]
Wind Speed
The wind speed is at a height of 10 meters above the ground [Unit: meters per second]
Wind Direction
The direction from which the wind blows [Unit: degrees East of North].