New HPOVSnmpConfiguration - HewlettPackard/POSH-HPEOneView GitHub Wiki
Create SNMP LIG Configuration Object
New-HPOVSnmpConfiguration [-ReadCommunity] <String> [-SnmpV1] <bool> [-SnmpV3] <bool> [-Contact] <String> [-AccessList] <Array> [-TrapDestinations] <Array> [<CommonParameters>]New-HPOVSnmpConfiguration [-ReadCommunity] <String> [-SnmpV3] <bool> [-SnmpV3Users] <SnmpV3User[]> [-SnmpV1] <bool> [-Contact] <String> [-AccessList] <Array> [-TrapDestinations] <Array> [<CommonParameters>]This helper Cmdlet provides the capability to create a new SNMP Configuration object for a Logical Interconnect Group or Logical Interconnect resources.
-AccessList <Array>
A collection [System.Collections.ArrayList ] of IP Addresses or Subnets. You must include the Subnet Mask Bit value. E.g. 10.44.120.9/32 or 172.20.148.0/22
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-Contact <String>
SNMP Contact Name.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-ReadCommunity <String>
The SNMP Read Community String to set.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-SnmpV1 <bool>
Specify if SNMPv1 should be enabled. Can be disabled when SNMPv3 is enabled.
| Aliases | None |
| Required? | True |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-SnmpV3 <bool>
Specify if SNMPv3 should be enabled.
| Aliases | None |
| Required? | True |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-SnmpV3Users <SnmpV3User[]>
Collection of SNMPv3 users to configure within the SNMP configuration object.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-TrapDestinations <Array>
A collection [System.Collections.ArrayList ] of SNMMP Trap Destinations. Use New-HPOVTrapDestination Cmdlet to create the object.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)
None. You cannot pipe objects to this Cmdlet.
HPOneView.Networking.SnmpConfiguration [System.Management.Automation.PSCustomObject]
SNMP Configuration object for a Logical Interconnect Group or Logical Interconnect resource
-------------------------- EXAMPLE 1 --------------------------$SnmpConfig = New-HPOVSnmpConfiguration -ReadCommunity MyR3adC0mmun1ty -AccessList "10.44.120.9/32","172.20.148.0/22 New-HPOVLogicalInterconnectGroup -LIGName "Flex10/10D and FlexFabric Production 1" -bays @{1 = "Flex1010D";2 = "Flex1010D";3 = "FlexFabric";4 = "FlexFabric"} -enableIgmpSnooping $True -igmpIdleTimeoutInterval 300 -LoopProtect $True -QosConfig $QosConfig
Create a new QOS Configuration object,and use the created object to add to a new Logical Interconnect Group.
Create SNMP LIG Configuration Object
New-HPOVSnmpConfiguration [-ReadCommunity] <String> [-Contact] <String> [-AccessList] <Array> [-TrapDestinations] <Array> [<CommonParameters>]This helper Cmdlet provides the capability to create a new SNMP Configuration object for a Logical Interconnect Group or Logical Interconnect resources.
-AccessList <Array>
A collection [System.Collections.ArrayList ] of IP Addresses or Subnets. You must include the Subnet Mask Bit value. E.g. 10.44.120.9/32 or 172.20.148.0/22
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-Contact <String>
SNMP Contact Name.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-ReadCommunity <String>
The SNMP Read Community String to set.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-TrapDestinations <Array>
A collection [System.Collections.ArrayList ] of SNMMP Trap Destinations. Use New-HPOVTrapDestination Cmdlet to create the object.
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)
None. You cannot pipe objects to this Cmdlet.
HPOneView.Networking.SnmpConfiguration [System.Management.Automation.PSCustomObject]
SNMP Configuration object for a Logical Interconnect Group or Logical Interconnect resource
-------------------------- EXAMPLE 1 --------------------------$SnmpConfig = New-HPOVSnmpConfiguration -ReadCommunity MyR3adC0mmun1ty -AccessList '10.44.120.9/32','172.20.148.0/22 New-HPOVLogicalInterconnectGroup -LIGName "Flex10/10D and FlexFabric Production 1" -bays @{1 = "Flex1010D";2 = "Flex1010D";3 = "FlexFabric";4 = "FlexFabric"} -enableIgmpSnooping $True -igmpIdleTimeoutInterval 300 -LoopProtect $True -QosConfig $QosConfig
Create a new QOS Configuration object,and use the created object to add to a new Logical Interconnect Group.