New HPOVQosTrafficClass - HewlettPackard/POSH-HPEOneView GitHub Wiki

Create QoS Traffic Classifier Object

New-HPOVQosTrafficClass [-Name] <String> [-MaxBandwidth] <Int32> [-BandwidthShare] <String> [-EgressDot1pValue] <Int32> [-IngressDot1pClassMapping] <Array> [-IngressDscpClassMapping] <Array>[ [-RealTime] <SwitchParameter>][ [-Enabled] <SwitchParameter>] [<CommonParameters>]

This helper CMDLET provides the capability to create a new QoS Traffic Classifier Object, which can then be added to either a Logical Interconnect Group, or Logica Interconnect resource.

Only non-FCoE Traffic Classifiers are allowed to be created. When creating the "Best effort" Traffic Classifier, only the MaxBandwidth parameter is allowed to be modified.

-BandwidthShare <String>

Minimum guaranteed bandwidth for the traffic class. The % share and the max share for a real time class must be equal and not exceed 50%.

Value between 1 and 100

-EgressDot1pValue <Int32>

Specifies the dot1p priority value to remark for the egressing packets. This provides flexibility to control priority treatment for packets at the next hops based on the remarked dot1p value.

-Enabled <SwitchParameter>

Specify to Enable the traffic class. By default, the class is disabled, even though it is defined.

-IngressDot1pClassMapping <Array>

Specify an array of ingress Dot1p values, and to which traffic class it is currently mapped. Allowed values:

* 0
* 1
* 2
* 3
* 4
* 5
* 5
* 6
* 7

-IngressDscpClassMapping <Array>

Specify an array of DSCP class mappings, per RFC 2475. Allowed values:

* DSCP 0, CS0
* DSCP 10, AF11
* DSCP 12, AF12
* DSCP 14, AF13
* DSCP 8, CS1
* DSCP 18, AF21
* DSCP 20, AF22
* DSCP 22, AF23
* DSCP 26, AF31
* DSCP 28, AF32
* DSCP 30, AF33
* DSCP 34, AF41
* DSCP 36, AF42
* DSCP 38, AF43
* DSCP 16, CS2
* DSCP 24, CS3
* DSCP 32, CS4
* DSCP 46, EF
* DSCP 40, CS5
* DSCP 48, CS6
* DSCP 56, CS7

-MaxBandwidth <Int32>

Maximum share the traffic class can use when other traffic classes are not using their guaranteed share. The max share and the % share for a real time class must be equal and not exceed 50%. For other classes, the max share is greater than or equal to the % share.

Value between 1 and 100

-Name <String>

Aliases [-ClassName] Name of the QoS Classifier. Value cannot be "FCoE lossless". If value is "Best effort", only the MaxBandwidth Parameter is allowed to be modified.

-RealTime <SwitchParameter>

Specifies whether the traffic class is real time. Only 1 traffic class can be real time. Enabling real time for this class removes the real time flag for other classes.

<CommonParameters>

This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)

None. You cannot pipe objects to this cmdlet.

HPOneView.Networking.QosTrafficClassifier [System.Management.Automation.PSCustomObject]

QoS Traffic Classifier Object

@{ qosTrafficClass = [PSCustomObject]@{

	maxBandwidth     = 100;
	bandwidthShare   = "0";
	egressDot1pValue = 0;
	realTime         = $false;
	className        = "Class";
	enabled          = $false;

 };

qosClassificationMapping = [PSCustomObject]@{

	dot1pClassMapping = @();
	dscpClassMapping  = @()

}

}

 -------------------------- EXAMPLE 1 --------------------------

$Class1 = New-HPOVQosTrafficClass -Name Class1 -MaxBandwidth 50 -BandwidthShare 20 -ExgressDot1pValue 2 -IngressDot1pClassMapping 5,6 -EgressDscpClassMapping "DSCP 0, CS0","DSCP 10, AF11","DSCP 12, AF12","DSCP 14, AF13"  -Enabled
$Class2 = New-HPOVQosTrafficClass -Name Class2 -MaxBandwidth 10 -BandwidthShare 10 -ExgressDot1pValue 3 -IngressDot1pClassMapping 1 -EgressDscpClassMapping "DSCP 30, AF33","SCP 32, CS4" -Enabled
$TrafficClasses = $Class1,$Class2

Create new traffic class objects "Class1" and "Class2", creating a new collection $TrafficClasses.

Create QoS Traffic Classifier Object

New-HPOVQosTrafficClass [-Name] <String> [-MaxBandwidth] <Int32> [-BandwidthShare] <String> [-EgressDot1pValue] <Int32> [-IngressDot1pClassMapping] <Array> [-IngressDscpClassMapping] <Array>[ [-RealTime] <SwitchParameter>][ [-Enabled] <SwitchParameter>] [<CommonParameters>]

This helper CMDLET provides the capability to create a new QoS Traffic Classifier Object, which can then be added to either a Logical Interconnect Group, or Logica Interconnect resource.

Only non-FCoE Traffic Classifiers are allowed to be created. When creating the "Best effort" Traffic Classifier, only the MaxBandwidth parameter is allowed to be modified.

-BandwidthShare <String>

Minimum guaranteed bandwidth for the traffic class. The % share and the max share for a real time class must be equal and not exceed 50%.

Value between 1 and 100

-EgressDot1pValue <Int32>

Specifies the dot1p priority value to remark for the egressing packets. This provides flexibility to control priority treatment for packets at the next hops based on the remarked dot1p value.

-Enabled <SwitchParameter>

Specify to Enable the traffic class. By default, the class is disabled, even though it is defined.

-IngressDot1pClassMapping <Array>

Specify an array of ingress Dot1p values, and to which traffic class it is currently mapped. Allowed values:

* 0
* 1
* 2
* 3
* 4
* 5
* 5
* 6
* 7

-IngressDscpClassMapping <Array>

Specify an array of DSCP class mappings, per RFC 2475. Allowed values:

* DSCP 0, CS0
* DSCP 10, AF11 
* DSCP 12, AF12 
* DSCP 14, AF13 
* DSCP 8, CS1
* DSCP 18, AF21
* DSCP 20, AF22
* DSCP 22, AF23
* DSCP 26, AF31
* DSCP 28, AF32
* DSCP 30, AF33
* DSCP 34, AF41
* DSCP 36, AF42
* DSCP 38, AF43
* DSCP 16, CS2 
* DSCP 24, CS3 
* DSCP 32, CS4 
* DSCP 46, EF
* DSCP 40, CS5 
* DSCP 48, CS6 
* DSCP 56, CS7

-MaxBandwidth <Int32>

Maximum share the traffic class can use when other traffic classes are not using their guaranteed share. The max share and the % share for a real time class must be equal and not exceed 50%. For other classes, the max share is greater than or equal to the % share.

Value between 1 and 100

-Name <String>

Aliases [-ClassName] Name of the QoS Classifier. Value cannot be 'FCoE lossless'. If value is 'Best effort', only the MaxBandwidth Parameter is allowed to be modified.

-RealTime <SwitchParameter>

Specifies whether the traffic class is real time. Only 1 traffic class can be real time. Enabling real time for this class removes the real time flag for other classes.

<CommonParameters>

This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)

None. You cannot pipe objects to this cmdlet.

HPOneView.Networking.QosTrafficClassifier [System.Management.Automation.PSCustomObject]

QoS Traffic Classifier Object

@{ qosTrafficClass = [PSCustomObject]@{

	maxBandwidth     = 100;
	bandwidthShare   = "0";
	egressDot1pValue = 0;
	realTime         = $false;
	className        = "Class";
	enabled          = $false;

 };
				
qosClassificationMapping = [PSCustomObject]@{
		
	dot1pClassMapping = @();
	dscpClassMapping  = @()
		
}

}

 -------------------------- EXAMPLE 1 --------------------------

$Class1 = New-HPOVQosTrafficClass -Name Class1 -MaxBandwidth 50 -BandwidthShare 20 -ExgressDot1pValue 2 -IngressDot1pClassMapping 5,6 -EgressDscpClassMapping 'DSCP 0, CS0','DSCP 10, AF11','DSCP 12, AF12','DSCP 14, AF13'  -Enabled
$Class2 = New-HPOVQosTrafficClass -Name Class2 -MaxBandwidth 10 -BandwidthShare 10 -ExgressDot1pValue 3 -IngressDot1pClassMapping 1 -EgressDscpClassMapping 'DSCP 30, AF33','SCP 32, CS4' -Enabled
$TrafficClasses = $Class1,$Class2

Create new traffic class objects 'Class1' and 'Class2', creating a new collection $TrafficClasses.