HFSS Modify Design Parameters - HRG-Lab/hfss-tutorials GitHub Wiki

Modify Design Parameters

First double-click on a design in the Project Manager window to make it the active design. Single-clicking the design name will bring up the parameter list in the Properties window below. Here you must enter the values for the physical dimensions of your design (e.g. widths and lengths of transmission lines). You should only modify parameters that pertain to your specific design, changing the substrate parameters can lead to errors in the simulation. When you have entered all of your design parameters and are ready to simulate, click on the green exclamation point ('Analyze All') to begin the simulation.