Wiki Changelog - Guilouz/Klipper-Flsun-Speeder-Pad GitHub Wiki

31/05/2024:

• Updated the following sections to build venv with more recent Python3/PIP versions to avoid install issues and to add support for latest version of KlipperScreen with NetworkManager:
  • Update Dependencies
  • Delete Flsun Builds
  • Install Official Builds (1 instance)
  • Install Official Builds (Multiple instances)

29/12/2023:

• Updated Install Official Builds (1 instance) and Install Official Builds (Multiple instances) sections with fix for issue when installing KlipperScreen.

05/12/2023:

• Updated macros.cfg files to improve M600 macro.

09/09/2023:

• Added new Use Klipper TMC Autotune section.

• Updated Use BigTreeTech KNOMI section.

• Updated printer.cfg files for Super Racer:

  • Improved checking of heating elements.

• Updated printer.cfg files for V400:

  • Improved checking of heating elements.
  • Switching microsteps to 64 (If you encounter an error while measuring the resonances. Replace the microsteps to 16 just for the duration of the test).
  • Improved max speed and max acceleration.
  • Improved motors current.
  • Switching drivers to spreadCycle mode for greater torque and more precision at high speed. Motors may make more noise but this is not abnormal.
  • Preconfigured settings to use Klipper TMC Autotune extension.

• Updated macros.cfg files for V400:

  • Preconfigured settings to use BigTreeTech KNOMI.

21/08/2023:

• Fixed compilation settings for Nano V2.1 Clone GD32F303 (Thanks to KORSiRO).

14/08/2023:

• Updated Update V400 Motherboard Firmware (BigTreeTech SKR 3.0)) section for STM32H723 version.

29/07/2023:

• Updated macros.cfg to fix "Move out of range" message during PIDs.

10/07/2023:

• Updated macros.cfg to replace M109/M190 with TEMPERATURE_WAIT.
  This just makes Klipper resume immediately after reaching temp. Otherwise it waits for the temperature to stabilize.

27/06/2023:

• Updated macros.cfg files to support new PID calibration on Keypad on KlipperScreen.

25/06/2023:

• Added Use BigTreeTech KNOMI section.

24/06/2023:

• Added Wiki for more visibilities.
• Added configurations files for V400 and MKS Nano V3.0/V3.1.
• Updated macros.cfg files.

22/05/2023:

• Updated macros.cfg files to support new PID menu on KlipperScreen.

17/04/2023:

• Improved all files.
• Added support for FLSUN ADXL.

15/03/2023:

• Replaced FLSUN restoration image file by new V1.2.

12/03/2023:

• Improved Gcode Arc support.

05/03/2023:

• Updated macros files to load default Bed Mesh at startup.

19/02/2023:

• Fixed "default" bed mesh in START_PRINT macro.

18/02/2023:

• Fixed V400 Hotend LED for some configuration files.
• Fixed Z-Offset in configuration files.

17/02/2023:

• Updated all configuration files so that they are in line with the new version of KlipperScreen. All your files need to be replaced with the new ones.
• New version of KlipperScreen which now allows to calibrate the Z-Offset and apply a safety Gcode Offset of 2mm before starting the first print.
• Added configuration files for Super Racer with BigTreetech SKR 2.0 Rev A and Rev B.
• Added new section to fix Shutdown button in Mainsail.
• Improved 'Calibrate your Printer' section for new changes.
• Added Start / End Gcode for Simplify3D.

10/02/2023:

• Added new section to fix Shutdown button in Mainsail (need to have latest update of Moonraker)

30/12/2022:

• Fixed bad character in printer.cfg files for Super Racer.

24/12/2022:

• Updated macros.cfg file ([gcode_macro START_PRINT]).

16/12/2022:

• Fixed Start Gcode for PrusaSlicer / SuperSlicer (Thanks to Julien Geffray).
• Changed Hotend preheat to 150C° instead of 100C° in START_PRINT macro.

13/12/2022:

• Fixed delete .gitconfig file before installing Kiauh in Delete Flsun Builds section.

12/12/2022:

• Updated macros.cfg file ([gcode_macro START_PRINT]) for latest Klipper changes with gcode_arcs.
• Added how to add camera support on Speeder Pad screen in Add Webcams Support section.
• Updated KlipperScreen.conf file to support camera url.

11/12/2022:

• Changes in Install Official Builds (1 instance) & Install Official Builds (Multiple instances) sections to install Klipper with Python 3.x as recommended.
• Added new section to update firmware for V400 (BigTreeTech SKR 3.0).
• Added new BigTreeTech SKR 3.0 config files for V400.