Restore OS Image File - Guilouz/Klipper-Flsun-Speeder-Pad GitHub Wiki

By default, Root access is not allowed on Speeder Pad. To enable it, follow these instructions to restore OS image file:

Note: A microSD card of at least 32 GB is required.

  • Download this restoration image and unzip it: Speeder Pad Restoration Image V1.2

    ⚠ Latest V1.4 image no longer allows SSH access, please use V1.2

  • Download and install Raspberry Pi Imager here: https://www.raspberrypi.com/software/

  • Launch Raspberry Pi Imager:

  • Select Speeder_Pad_V1.2_Restoration-230303.xz image file as Operating System by selecting Use custom.

  • Select your microSD card as Storage.

  • Then click Write.

  • Once the image is written, turn off Speeder Pad if is on and remove all devices plugged into the USB ports.

  • Insert microSD card in Speeder Pad and turn on it.

  • A loading bar should appear:

  • And wait until the bar is fully charged and green, this may take several minutes (10/15 minutes):

  • When it's done, turn off Speeder Pad and remove the microSD card.

  • Turn Speeder Pad back on, it should start normally and arrive on KlipperScreen splashscreen.

  • Wait until KlipperScreen show a connection error message on the Speeder Pad and go to Menu --> Network and connect it to your WiFi network.

  • Once connected, restart the Speeder Pad for the connection to take effect.

  • You can now connect to SSH with this login:

    user: pi
password: flsun