Install Official Builds (Multiple instances) - Guilouz/Klipper-Flsun-Speeder-Pad GitHub Wiki

[!CAUTION] Make sure you have followed this Update Dependencies section before!

Note: Multiple instances corresponds to the use of several printers on the Speeder Pad.

In this section, we will install 3 instances but you can install 2 if you want (no more than 3 is recommended).

• Relaunch Kiauh by entering this command:

  ./kiauh/kiauh.sh
  

• Enter in 1) [Install] menu by typing 1 then Enter:

• Install 1) [Klipper] by typing 1 then Enter.

• Select 1) [Python 3.x] (recommended) by typing 1 then Enter.

• Then enter the number of Klipper instances by typing 3 and Enter to confirm:

• When asked to assign custom names, select NO by typing N then Enter:

• When it's done, install 2) [Moonraker] by typing 2 then Enter and confirm by typing Y.

• Then enter the number of Moonraker instances by typing 3 then Enter and confirm by typing Y:

• When it's done, you get your 3 instances with their IP addresses and ports, write them down they will be useful later:

• Install 3) [Mainsail] by typing 3 then Enter and select no by typing n when asked to add the recommended macros.

• When it's done, go back to main menu by typing B then Enter.

• Exit Kiauh by typing Q then Enter.

• Enter the following commands (one at a time) to install KlipperScreen:

  cd ~ && git clone https://github.com/Guilouz/KlipperScreen-Flsun-Speeder-Pad.git /home/pi/KlipperScreen
  

  ./KlipperScreen/scripts/KlipperScreen-install.sh
  

  Note: Installation may take several minutes.

• When installer asks if you want to install KlipperScreen in standalone mode, select Yes by typing Y and confirm with Enter.

• When installer asks to choose graphical backend, select Xserver by typing X and confirm with Enter.

• When installer asks to install NetworkManager for the network panel, select No by typing N and confirm with Enter.

• When it's done, enter this commands (one at a time):

  cd ~ && ln -s ~/gcode_files/USB-Disk ~/printer_1_data/gcodes/USB-Disk
  

  ln -s ~/gcode_files/USB-Disk ~/printer_2_data/gcodes/USB-Disk
  

  ln -s ~/gcode_files/USB-Disk ~/printer_3_data/gcodes/USB-Disk
  

  sudo reboot
  

• After reboot, go to your Mainsail Web interface then select the Machine tab.

• Open the moonraker.conf file and add the following lines at the end of the file:

  [update_manager KlipperScreen]
  type: git_repo
  path: ~/KlipperScreen
  origin: https://github.com/Guilouz/KlipperScreen-Flsun-Speeder-Pad.git
  virtualenv: ~/.KlipperScreen-env
  requirements: scripts/KlipperScreen-requirements.txt
  system_dependencies: scripts/system-dependencies.json
  managed_services: KlipperScreen
  

• Once done, click on SAVE & RESTART at the top right to save the file.

• You will get the latest versions of KlipperScreen which point to my repo (More info are available here: KlipperScreen-Flsun-Speeder-Pad).

• Your Speeder Pad now running official builds with multiple instances.