• Home
  • Yeti 1500X/3000X/6000X
    • How to Display Firmware Versions
      • Overview
      • Display Main Control Board Firmware Version
      • Display Internal Charge Controller Firmware Version
      • Display Model Number
      • Display WiFi Firmware Version
      • Display External Accessory Firmware Version

---

Hold down the INFO button and Press the UNITS button 3 times until bld is shown, release buttons, wait about 2 seconds and the firmware versions will be displayed

---

1. Display Firmware Versions
   1. Main Control board firmware version is shown in Right-hand number segments
   2. 

1. Display Firmware Versions
   1. Internal charge controller firmware version is shown in INPUT number segments
   2. 

1. Display Firmware Versions
   1. Model Number is shown in State of Charge percentage number segments
   2. 

1. Ensure VOLTS, AMPS, or WATTS is shown in the output section of the Display
   1. Press UNITS if WATT HOURS is shown
   • 
   2. Display Firmware Versions
      1. Wireless Module firmware version is shown in OUTPUT number segments
      2. 

1. Ensure WATT HOURS is shown in the output section of the Display
   1. Press UNITS, multiple times if needed, until WATT HOURS is shown
      • 
   2. Display Firmware Versions
      1. External accessory firmware version is shown in OUTPUT number segments
      2.