Joystick Map - Gnewt/bainbridgefirst GitHub Wiki

Link to Joystick controls and the Joystick Explorer UI program

Logitech Attack 3:

Important: xy axis may not be perfectly calibrated

Observations: Using the Joystick Explorer UI program the Logitech Attack 3 loses inital set values at rest when used. The initial set values are (0) and then change after use.

• x-axis (1) = stick side to side (all left: = -1 & all right = +1)
• y-axis (2) = stick forward/back (all forward = -1 all back +1)
• z-axis (3) = throttle (push forward is -1 pull back is +1)
• Axis(4),(5),(6)are not used
• There is no button 12

Logitech Extreme 3D Pro

Important: xy axis is not perfectly calibrated at 0

• x-axis (1) = stick side to side (all left = -1 & all right +1)
• y-axis (2) = stick forward/back (forward = - 1 & backward = +1)
• z-axis (3) = stick twist(twist left=-1 & twist right = +1)
• small joystick (5) = push button style with -1 left & +1 right (no floating value)
• small joystick (6) = push button style with -1 forward & +1 backward
• throttle (4) = throttle (forward = -1.0, back = 1.0, middle=0)
• all other buttons (match the printed values)

Side note: the plural of axis is axes.

Using Two Joysticks

• If your going to use two joysticks, the most recently plugged in one is set to joystick one.
• You can change this by going into setup and in a panel called joystick setup, you can drag and drop to change the order.