img_v1.0/config/network.jpg

Wifi Settings

Hostname

This is the Name of the Tiny Pixel Mapper and also the SSID of the Access point if set to AP mode

AP Password

This is the Password to connect to the TinyPixelMapper when set to AP mode.

Client SSID

What SSID should the TPM connect to.

Client Password

The Password of the Client SSID

Wifi Power

On = Wifi enabled

Off = wifi power off

If wifi power is off then you can set the TPM back to AP mode with the default password of "love4all" if you HOLD the BUTTON during BOOT

When ethernet is connected wifi is automatically switched off. If its set to DHCP and does not recive an IP it will switch wifi back on.

Wifi Mode

While booting the TPM will display the Wifi mode with a COLOR FLASH, GREEN = AP-Mode , RED = Client Mode

Services

HTTP Server

If enabled a HTTP server is online with a file editor (http://ip/edit) where you can edit all the config files.

Debug Serial

Output Debug information on the Serial (USB) port.

Disable if not required uses up CPU

Debug Telnet

Output debug information over telnet.

Disable if not required uses up CPU

IP Settings

IP Mode

Static = use settings below

DHCP = get the IP from the DHCP server

IP Settings

Enter the Correct IP, Subnet Mast, Default Gateway and DNS server (optional for NTP)

NTP FQDN

Set your NTP server so that the Clock effect has the right time.