Standard Antenna Controls

"Channel 0 Active Jump Gate", "Channel 1 Active Jump Gate", "Channel 2 Active Jump Gate"

The jump gate this antenna will allow remote control of on channel 0, 1, and 2 respectively. Jump gates currently controlled by another antenna or controller will not be shown.

"Antenna Range"

The range (in meters) this antenna will broadcast at. Antennas can only control jump gates remotely if in range.

"Jump Gate Name"

This option specifies the name of the attached jump gate. Names do not have to be unique and while they can be left blank, its better to name gates for organization purposes later. This option only affects jump gates this antenna is attached to. To rename a jump gate connected remotely, use the jump gate controller.

"Allowed Controller Settings"

These options specify what jump gate parameters a remotely connected controller can control.

Example: If "Allow Destination Change" is false, any controller remotely connecting to this gate won't be able to change the gate's destination

"Controller Settings Channel"

This specifies which channel's controller settings to modify. All terminal controls and options below this correspond with the controller settings.

See Controller Terminal Settings for a description on what each setting does.

The antenna settings set the base values for it's jump gate on the specified channel. Once a controller connects, any setting not allowed by this antenna will be replaced using the setting specified in this antenna.

For example, if you change this antenna's "Jump Space Radius" option to 100 meters and disabled the ability for remote controllers to affect the jump space, any controller connecting will use the 100 meter value as it's default.