B.O.M. Bill Of Materials - GemstockCo/Gemstock-Mk2 GitHub Wiki

Bill Of Materials:

!Under construction!

Here you will find a list of all parts needed to build a Gemstock Mk2. If you find anything to be missing from the list please contact us.

Electronics:
  • 1x Control board
  • 3x Stepper drivers
  • 3x Nema 17 stepper motor (48mm)
  • 1x 12V 20A Power supply
  • 1x 12V 310mm Round heated bed
  • 4x KW12-3 Microswitch
  • 1x E3D Hotend
  • 1x LCD 12864 full graphics smart controller
  • 1x 12V 50x50x15mm Radial Fan
Hardware:
  • 3x 300mm 2060 aluminium extrusions
  • 3x 300mm 2040 aluminium extrusions
  • 6x 10x1000mm smooth rods
  • 12x 12x4mm Countersunk magnets
  • 12x M4 Threaded steel balls
  • 36x 623ZZ Bearings
  • 6x F623ZZ Bearings
  • 3x 625ZZ Bearings
  • 3x GT2 16T Pulleys
  • Bolts:
    • 102x M5x10mm Bolts
    • 6x M2,5x10mm Bolts
    • *Incomplete
  • Nuts:
    • 72x DIN 439 M5 Nut
    • *Incomplete
  • Washers:
    • *Incomplete
Other:
  • 1x Printer parts set
  • 7m GT2 Timing belt
  • 6x 8x10x300mm 3K Carbon tubes
  • 1x 300x5mm round mirror
  • 1m PTFE Tube (2mm ID/4mm OD)
  • 1m Cable management wrap (6mm)
  • 10m 22AWG Wire
  • 6x Female dupont 2.54mm connectors
  • 4x Male dupont 2.54mm connectors
  • 3m of fishing wire
  • A handful of cable ties

If your confident you have gathered all parts necessary you can start building your Gemstock Mk2.