Commands - Gameagle/vSID GitHub Wiki

Synchronization

.vsid sync

All open requests, ground states and the clearance received flags are synchronized between all controllers.

Help

.vsid

Help text. Prints out available commands.

Low Visibility Procedures

.vsid lvp [icao]

Prints out LVP setting for every active airport. [icao] toggles LVP for this airport.

Time Mode

.vsid time/night [icao]

Prints out time setting for every active airport. [icao] toggles time for this airport. Determines if SIDs with a given time frame is considered.

Rules

.vsid rule [icao] [rulename]

• prints out every rule setting for every airport
• [icao] prints out every rule setting for this airport
• [icao] [rulename] toggles the specified rule for this airport

Auto-Modus

.vsid auto

Toggles auto mode for all active airports.

.vsid auto [icao]

Activate the auto mode for the specified airport only in the "forced mode". This enables to activate the auto mode even if a lower station is online that would deactivate the own auto mode.

.vsid auto status

Shows where auto mode is active (it might be disabled due to lower controllers online)

.vsid auto off

Shuts down auto mode for all active airports

Areas

.vsid area [icao] [areaname]

Debug

If you're interested in debug messages the following command can be used

.vsid debug

Activates ALL debug messages and opens/closes the debugging console

.vsid debug all | sid | rwy | atc

Opens the debugging console if not already open and switches to the specified debugging "area"

sid: Messages for sid evaluation

rwy: Messages on why a rwy is marked as set by ATC in the rwy tagItem

atc: Messages on atc updates and if a controller is ignored, set for an active airport or skipped (observer, invalid freq. etc.)

.vsid request

Will display all open requests stored by the plugin.