Testing against FTP Server - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

  • Atari
  • FujiNet
  • Working WiFi Connection
  • atari-apps.irata.online in an available host slot.

Steps

  1. Power on FujiNet
  2. Power on Atari
  3. Wait for CONFIG to boot.
  4. In Hosts, select atari-apps.irata.online host slot.
  5. Select Tests/ directory
  6. Select n-handler-dosxl.atr, select D1:, mount as R/O
  7. Once HOSTS/DEVICES appears, press OPTION to boot. Keep holding OPTION to disable BASIC.
  8. Wait for DOS XL banner.
  9. Change N:'s directory to FTP.PIGWA.NET by typing (being sure to unlock CAPS LOCK!):
    D1:NCD N:FTP://FTP.PIGWA.NET/stuff/collections/
    
  10. Verify that N's directory is correct by using NPWD:
    D1:NPWD N:
    FTP://FTP.PIGWA.NET/stuff/collections/
    
    D1:
    
  11. Get a directory of the FTP server using DIR.
    NDIR
    ... Press [Return]... A list of files in this directory, mostly directories...
    
  12. Move into the "holmes cd" directory using NCD
    D1:NCD N:holmes cd/
    
  13. Get a directory.
    D1:DIR N:
    Holmes 1
    Holmes 2
    Holmes 3
    
  14. Change directory further in to Holmes 2/Atari Archives/Antic Files/88/
    D1:NCD N:Holmes 2/Atari Archives/Antic Files/88/
    
  15. Verify that the directory is changed with NPWD. If no devicespec is specified, N1: is assumed.
    D1:NPWD
    FTP://FTP.PIGWA.NET/stuff/collections/holmes cd/Holmes 2/Atari Archives/Antic Files/88/
    
  16. Try to load KENO.EXE from this directory
    LOA N:KENO.EXE
    
  17. Keno should load.
  18. Cold start the Atari, leave option un-held to load BASIC (or insert BASIC cartridge if needed)
  19. When BASIC loads and you see FUJINET READY, try loading SUNSET.BAS
    READY
    RUN"N:SUNSET.BAS
    
    (Note that the directory is still set to the above.)
  20. Power off the Atari

Expected Result

  • KENO.EXE should load from the FTP site. SUNSET.BAS should RUN from BASIC from the same FTP site.