Testing Results V1.3 ‐ Atari - FujiNetWIFI/fujinet-firmware GitHub Wiki

Initial Power on

Power on FujiNet via external USB

(using SD card from known good network configuration)

Did Lights blink dim, then black? Yes
Did White WIFI light turn on? Yes

FujiNet booted with the following debug info:

17:24:11.746 > FujiNet v1.3 2024-04-20 17:00:00 Started @ 7
17:24:11.746 > Starting heap: 4297920
17:24:11.748 > [src/main.cpp:162] main_setup(): Heap: 157047
17:24:11.750 > 
17:24:11.771 > Detected Hardware Version: 1.6.1 and up
17:24:11.771 > Safe Reset button ENABLED on GPIO 14
17:24:12.241 > SPIFFS mounted.
17:24:12.330 > SD mounted.
17:24:12.330 > fnConfig::load
17:24:12.330 > Load fnconfig.ini from SD
17:24:12.330 > fopen = /fnconfig.ini : ok
17:24:12.335 > fnConfig::load read 1096 bytes from config file
17:24:12.335 > Reading wifi section
17:24:12.338 > Reading stored wifi section for index: 0
17:24:12.433 > FLASH Config Storage: Enabled
17:24:12.433 > fnConfig::load read 1096 bytes from FLASH config file
17:24:12.435 > disk UNMOUNT
17:24:12.435 > FileSystemSPIFFS::filehandler_open /autorun.atr rb
17:24:12.673 > new FileHandlerLocal
17:24:12.673 > disk MOUNT
17:24:12.673 > ATR MOUNT
17:24:12.673 > FileHandlerLocal::seek
17:24:12.674 > FileHandlerLocal::read
17:24:12.674 > mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0
17:24:12.676 > PCLINK[1] MOUNT "/sd"
17:24:12.676 > Creating a default printer using FS_SDFAT storage and type 2
17:24:12.677 > SIO SETUP
17:24:12.678 > Set HSIO baud from 19200 to 124017 (index 0), alt=126674
17:24:12.678 > Available heap: 4205512
17:24:12.680 > Setup complete @ 938 (931ms)
17:24:12.680 > [src/main.cpp:463] main_setup(): Low Heap: 148475
17:24:12.683 > 
17:24:12.693 > WiFiManager::start() complete
17:24:12.775 > WiFiManager attempting to connect:
17:24:12.775 > ssid = Cherryhomes
17:24:12.775 > WiFi connect attempt to SSID "Cherryhomes"
17:24:12.777 > WIFI_EVENT_STA_START
17:24:12.777 > esp_wifi_connect returned 0
17:24:14.593 > WIFI_EVENT_STA_CONNECTED
17:24:16.586 > IP_EVENT_STA_GOT_IP
17:24:16.586 > Obtained IP address: 192.168.1.19
17:24:16.586 > SNTP client start
17:24:16.589 > Starting web server on port 80
17:24:19.640 > SNTP time sync event: Sat Apr 20, 22:24:19 2024 +0000

Power on Atari

Did Config boot? Yes
Did Saved host list appear? Yes

Check Config menu

Does Config show the correct version? Yes

Check SPIFFS persistence

Remove SD card
Reset Fujinet
Does WiFi light up? YES

Check SPIFFS zap

(SD CARD SHOULD BE REMOVED!)

Reset FujiNet while holding second button (B)
Does WiFi light stay off? YES

Check WiFi association with Scanned Network

(SD CARD SHOULD STAY REMOVED!)

Press RESET on Atari to reboot config
Does CONFIG load? YES
Does WiFi Scan appear with list of networks? YES

ESC Re-Scan
Does WiFi List re-appear? YES
Select local WiFi network
Enter Password
Does WiFi Light appear? YES
Does Host/Drive Screen appear? YES

Check WiFi association with arbitrary SSID (Hidden)

(SD CARD SHOULD STAY REMOVED!)

Press RESET while holding B button
Does WiFi light stay off? YES
Press RESET on Atari to reboot config
Does CONFIG load? YES
Select <Enter A Specific SSID>
Enter the name of your local Network

Enter Password
Does WiFi Light Appear? YES
Does Hosts/Drives appear? YES

Enter The following Hosts using Edit

SD
fujinet.online
apps.irata.online
tnfs.atari8bit.net
fujinet.diller.org
fujinet.pl

By using the following procedure:

Select host slot
Press E to edit
Enter Host Name
Press CTRL-A
Does cursor go to beginning? YES
Press CTRL-E
Does cursor go to end? YES

Test persistence of host slots

RESET the Atari
Does CONFIG load? YES
Does Host List persist? YES

Test loading of ATR image

Select FUJINET.ONLINE host
Does Server connect and show root directory? YES
Select ATARI
Does it change to ATARI directory? YES
Select games
Go to second page by pressing > or down-arrowing until second page appears
Does second page appear? YES
Select Jumpman.atr
Does MOUNT TO DRIVE SLOT appear? YES
Ensure Slot 1 selected, press RETURN
Does bottom text change to RETURN Read Only W Read/Write ESC Abort? YES
Press RETURN again to mount read-only
Does Directory appear again? YES
Press ESC to go back to Host/Drives
Does Hosts/Drive appear? YES

Press and hold OPTION.
Does System Mount and BOOT? YES
Did Jumpman load? YES

Test Eject

Tap reset on FUJINET
BOOT Atari into CONFIG
Press TAB to go to DRIVES
Does bar move to drives? YES
Press E to eject the first slot.
Does slot change to Empty? YES
tap OPTION
Does Atari boot to READY, MEMO PAD, or SELF TEST? YES

Test ATX support

Tap reset on FUJINET
BOOT Atari into CONFIG
Select APPS.IRATA.ONLINE
Select Atari_8-bit
Select Games
Select a8p
Press F (filter)
Set Fltr: to Rescue*
Do we see four files beginning with Rescue? YES
Select Rescue on Fractalus! v4.4 (1985)(Epyx)(US)[!].atx

Mount to drive slot 1
Read only
Wait for directory list
Hold OPTION to boot
Does Rescue on Fractalus boot into game? YES

Check SD card configuration migration to SPIFFS

Re-insert previously removed SD card back into SD card slot
Reset FujiNet
Reset ATARI to boot back into config
Does configuration stored on SD card show up? YES

Check Disk image creation

(this tests disk writing too)

Select SD
Press N for New
press 7 for CUSTOM
num of sectors 65535
Sector size 256
filename big.atr
mount to drive 2
read/write
Press ESC to abort
select Apps.irata.online
select Atari_8-bit
select DOS
select MyDOS 4.53.atr
mount in drive 1, read only
hold option to boot, bypass basic
press O
drive 2
remove drive N
is drive configurable Y
high capacity drive Y
drive size in sectors 65535
press I
disk to format 2
y to format
does format complete? YES
press 2
65491 FREE SECTORS? YES

Clear all drive slots

Reset FujiNet
Reset ATARI, boot into CONFIG
Press TAB
Press SHIFT-CLEAR to clear all slots.
Do all slots clear? YES

Get Host name

Press TAB to return to host list
Tap C to get configuration
Note the host name and/or IP
Press any key to get back to host list

Access web UI

in nearest web browser go to host name or IP of FujiNet
Does Web UI appear? YES

Set Printer

In Printer Settings
Set Use as Virtual Printer to Yes
Set Port to P1:
Set Emulated Printer to Atari 1027
Press Save
Scroll back to Emulated Printer
Is Emulated Printer set to Atari 1027? YES

Boot to BASIC

With all slots empty, tap OPTION to boot to BASIC
READY prompt? YES

Test the emulated printer

Enter the following

LPRINT "TESTING THE PRINTER."

Does the READY prompt appear, sans raspberry? YES
While still in Web UI, press Click to Download your Current Print-out.
Does A Printout.pdf file download? YES
Open Printout.pdf
Does the Printout-text appear at top of page 1? YES

Test SAM (since we're here, and it's printer adjacent)

Enter the following

OPEN #1,8,0,"P4:"

does READY appear? YES
Enter the following

PRINT #1;"HELLO FROM SAM"

Is SAM's voice heard? YES

Test MODEM

Tap RESET on FujiNet, boot into CONFIG
Select apps.irata.online host
Select Atari_8-bit
Select Comms
Select Bobterm 1.23.atr
Mount to drive 1, read only
Hold Option to boot
Does the Atari 850 BEEP sound? YES
Press RETURN to go into terminal mode
type AT and press RETURN
Do we see OK? YES
type ATDTBBS.FOZZTEXX.COM
walk through BBS, and log off
Do we see NO CARRIER on disconnect? YES

RUN"D:MASTODON.BAS"

Does a Mastodon post appear? YES