SIO Command $D9 Enable Disable CONFIG in D1 - FujiNetWIFI/fujinet-firmware GitHub Wiki

This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).

Description

Enable or Disable the CONFIG disk image built into FujiNet. If enabled, it takes over device slot 1 (D1:)

Parameters

DCB	Value
DDEVIC	$70
DUNIT	$01
DCOMND	$D9
DSTATS	$00
DBUF	NULL
DTIMLO	$0F
DBYT	0
DAUX	0=disable, 1=enable

Examples

CC65

/**
 * Set CLOCKIN clock rate to rate.
 */
void fuji_sio_set_config_boot(unsigned char b)
{
  OS.dcb.ddevic=0x70;
  OS.dcb.dunit=1;
  OS.dcb.dcomnd=0xD9;
  OS.dcb.dstats=0x00;
  OS.dcb.dbuf=NULL;
  OS.dcb.dtimlo=0x0F;
  OS.dcb.dbyt=0;
  OS.dcb.daux1=b;
  siov();
}