Printing Epson Graphics Output from Print Shop - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

  • Atari Computer
  • FujiNet
  • Working WiFi connection
  • atari-apps.irata.online should be in a host slot.

Steps

  1. Power on FujiNet
  2. Power on Atari
  3. Wait for CONFIG
  4. Ensure atari-apps.irata.online is in a host slot.
  5. Select atari-apps-irata.online
  6. Select PrintShop/
  7. Select sideA.atr
  8. Mount in D1:
  9. Mount as R/O, ensure /PrintShop/sideA.atr is mounted as R in D1:
  10. Select atari-apps.irata.online, again
  11. select PrintShop/
  12. select sideB.atr
  13. Mount in D2:
  14. Mount as R/O, ensure /PrintShop/sideB.atr is mounted as R in D2:
  15. Press OPTION to boot. Hold OPTION to disable BASIC, if needed.
  16. Wait for The Print Shop to boot. Wait for menu.
  17. Use arrow keys to select SIGN from menu.
  18. Select a border. Press RETURN.
  19. CHOOSE A GRAPHIC, any graphic.
  20. Choose a graphics size, any graphic size.
  21. Choose a font. Any font.
  22. Enter a message. Any message.
  23. Go to web browser. http://espressif/ or whatever hostname is used.
  24. Change Printer Type: Epson 80. Press CHANGE.
  25. Confirm that Current: Epson 80 on P1:
  26. Select **** PRINT ****
  27. When asked to insert SIDE B, press the DISK SWAP button. Note the momentary blue flash, as confirmation.
  28. Press RETURN
  29. Wait for PRINTING to complete. this will take approximately 8 minutes.
  30. When asked to insert SIDE A, press the DISK SWAP button. Note the momentary blue flash, as confirmation.
  31. Press RETURN
  32. Go to web browser. click printer icon.
  33. Open printer output
  34. Verify that your sign from print-shop printed without visible errors.
  35. Turn off Atari. Test done.

Expected Result

  • Printed sign output from Print Shop in PDF output file.