N: SIO Command 'Z' Set PROCEED Timer Rate - FujiNetWIFI/fujinet-firmware GitHub Wiki
N: SIO Command 'Z' Set PROCEED Timer Rate
This is a command for Devices $71-$78 - The N: Device (see SIO-Commands-for-Device-IDs-$71-to-$78).
Description
Sets the rate, in milliseconds to wait between asserting the PROCEED (interrupt) line. By default, this value is 100 milliseconds.
Parameters
| DCB | Value |
|---|---|
| DDEVIC | $71 |
| DUNIT | $01 - $04 |
| DCOMND | $5A 'Z' |
| DSTATS | $00 |
| DBUF | NULL |
| DTIMLO | $0F |
| DBYT | 0 |
| DAUX | Milliseconds value |
Examples
CC65
OS.dcb.ddevic=0x71;
OS.dcb.dunit=1;
OS.dcb.dcomnd='Z';
OS.dcb.dstats=0x00;
OS.dcb.dbuf=NULL;
OS.dcb.dtimlo=0x0f;
OS.dcb.dbyt=0;
OS.dcb.daux=20; // Set to 20 milliseconds
siov();
See Also
Put other related command links here.