Connecting to a BBS - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

Power on FujiNet
Power on Atari
Wait for CONFIG to boot.
Select atari-apps.irata.online
Select Atari_8-bit folder.
Select Comms folder.
Select modem-programs.atr
Ensure that modem-programs.atr is mounted as R on D1:
Press OPTION to boot.
Wait for menu.
Select 1 for Bobterm from the menu. Wait for BOBTerm to load.
Once BOBTerm is loaded, Press B to select 2400 baud.
Press B again to select 4800 baud.
Press RETURN to enter Terminal Mode.
Type AT RETURN (keypresses should echo)
FujiNet should respond OK
Type ATDT southernamis.ddns.net RETURN
Fujinet will attempt to connect to Southern Amis BBS.
Modem should respond with CONNECT 4800, followed by BBS login.
If the BBS is busy, then try the Basement BBS by typing ATDT basementbbs.ddns.net:9000 RETURN
If you are logging into Southern Amis, enter your handle and your password. If you are a new user, then enter NEW for your password.
If you are logging into the Basement BBS, then enter your alias (handle) and your password. If you are a new user, then enter NEW for your alias.
Once logged in, press ? for a list of BBS commands.
Try some of these BBS commands.
When you are ready to log out, press G from the main prompt and following the logout instructions.
Once logged out, FujiNet should respond with NO CARRIER.
Test done. Power down Atari.

WiFi Modem should be able to properly respond and connect/interact to southernamis.ddns.net and basementbbs.ddns.net:9000 BBSs.