Configuration Test - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

  • Atari Computer
  • FujiNet
  • Working WiFi connection
  • Computer with a web browser on the same WiFi network (optional)
  • Micro-SD card in slot (optional)
  • A modern computer capable of accessing a Micro-SD card (optional)

Steps - Atari

  1. Power on FujiNet
  2. Power on Atari
  3. Wait for CONFIG to boot
  4. Press [C] to view config screen

Expected results

The "FUJINET CONFIG" screen appears, showing details about your FujiNet (WiFi details like SSID, IP Address, Gateway, and DNS; and version of the CONFIG program).

Steps - Web Browser

  1. Note the IP Address of the FujiNet as shown on the Atari (e.g., "192.168.0.42")
  2. Visit the page at that IP address (e.g., http://192.168.0.42/ -- HTTP, port 80)

Expected results

  • A web page appears, showing details about your FujiNet (WiFi details, as above; version of the FujiNet firwmare, hardware details), and options for other settings that may be configured.
  • Configuration changes are accepted and saved (e.g., changing high speed I/O (HSIO) values)

Steps - Micro-SD card

  1. Long press "Button B" (middle-left) to safe reset -- unmounts the SD card before reboot.
  2. Remove the Micro-SD card from the FujiNet
  3. Insert the Micro-SD card into your modern computer and mount it
  4. Open the "fujinet.ini" file in a text editor

Expected results

Configuration details should be seen.