Config 2.0 Verify XEX Disk Booting - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

  • Atari Computer
  • FujiNet
  • Previous Config 2.0 tests done.
  • HOMESOFT.IRATA.ONLINE in a host slot.

Steps

  1. Reset FujiNet
  2. Power on Atari, wait for CONFIG
  3. Wait for Network.
  4. Wait for Hosts/Devices
  5. Select HOMESOFT.IRATA.ONLINE
  6. Select Ace Dribbler and The Roadhogs.xex
  7. Mount to D1:
  8. Mount as R/O
  9. Once Hosts/Devices re-appears, verify that Device Slot 1 reads /A/Ace Dribbler and The Roadhogs.xe (the last x is not displayed)
  10. Press OPTION. Verify that MOUNT AND BOOT is displayed, and the Atari cold-starts, booting the game.
  11. Verify that the game loads.
  12. Power down.

Expected Result

  • CONFIG should mount the XEX as a boot loadable disk and run it.