Commands for Device $0F (Fujinet) - FujiNetWIFI/fujinet-firmware GitHub Wiki

The following table shows the currently proposed commands for Device $0F - The FujiNet Device itself.

Command	Description
$D1	Device Enable Status
$D2	Get Time
$D3	Random Number
$D4	Disable Device
$D5	Enable Device
$D6	[Set Boot Mode]
$D7	[Mount All]
$D8	[Copy File]
$D9	[Enable/Disable CONFIG in D1:]
$DA	[Get Device Slot Filename]
$DB	[Close App Key]
$DC	[Open App Key]
$DD	[Read App Key]
$DE	[Write App Key]
$DF	[Set External SIO Clock]
$E0	[Get Host Prefix]
$E1	[Set Host Prefix]
$E2	[Set Filename for Device Slot]
$E4	[Set Directory Position]
$E5	[Get Directory Position]
$E6	[Unmount Host]
$E7	[New Disk]
$E8	[Get Adapter Config]
$E9	[Unmount Device Image]
$F1	[Write Device Slots]
$F2	[Read Device Slots]
$F3	[Write Host Slots]
$F4	[Read Host Slots]
$F5	[Close Directory]
$F6	[Read Directory]
$F7	[Open Directory]
$F8	[Mount Device Image]
$F9	[Mount Host]
$FA	[Get WiFi Status]
$FB	[Set SSID and Connect]
$FC	[Get Scan Result]
$FD	[Scan Networks]
$FE	[Get SSID]
$FF	[Reset FujiNet]

This list is very much in progress and is subject to change.