Boot a Game from Fujinet.Online - FujiNetWIFI/fujinet-firmware GitHub Wiki

For this test, you will need

• Atari Computer
• FujiNet
• to have completed the Boot the #FujiNet to CONFIG procedure.

Steps

1. Power on #FujiNet
2. Power on Atari
3. Wait until the TNFS HOST LIST and DRIVE SLOTS screen appears
4. Under TNFS HOST LIST cursor down to a slot labeled EMPTY and tap_E_
5. Where the cursor appears, enter fujinet.online and press RETURN.
6. With fujinet.online highlighted, press RETURN
7. On the DISK IMAGES screen, highlight games and press RETURN
8. Highlight Jumpman.atr from the list, and press RETURN
9. At the MOUNT TO DRIVE SLOT screen, highlight 1 for D1 and press RETURN
10. Note RETURN Read Only W Read/Write prompt at the bottom. Tap R
11. Hold OPTION to mount and boot. If using an XL or XE series computer, HOLD OPTION TO DISABLE BASIC.
12. On a 400/800 system, press OPTION and let go. On an XL/XE series, press and hold OPTION held.
13. Wait for Jumpman to boot.

Expected Result

• Jumpman should boot to splash screen.