D35CF - FresnoSubber/Fresno-and-Co.-Trainbuild-Tomfuckery GitHub Wiki
RLC PT2 Specific Information
| General Info | - |
|---|---|
| Engine | R-P 16RK3CT |
| Power Output | 3,520hp (3,250hp for traction) |
| Bogie Type | SLM CP2 (1) |
| Axles | 6 |
| Traction Motors | 6 |
| Minimum Weight | 360,000lbs |
| Maximum Weight | 410,000lbs |
| Model Base Speed | 60mph |
| Top Speed | 60mph, 65mph, 70mph, 75mph, 80mph, 85mph, 90mph, 95mph, 100mph |
| Electrical System | BEM |
|---|---|
| Alternator Max Current | 2,100A ⚠ |
| Max Traction Motor (TM) Current | 700A ⚠ |
| Max Continuous TM Current | 550A ⚠ |
| Traction Motor Type | DC (BEM TM73-62) |
| Factor Of Adhesion | 25% (1) |
| Transition Mode | Fully Automatic (2) |
| Transition Groups | 2, 2 |
| Transition Shunts | 1, 0.7 ⚠ |
| Alternator Transition | No |
| Traction Control | APR (3) |
| Dynamic Braking (DB) Mode (if used) | Electrically Driven Blowers |
| DB Max Current | 700A ⚠ |
| DB Max Continuous Current | 550A ⚠ |
| Blended Braking | No |
| Electrical System | GEC |
|---|---|
| Alternator Max Current | 2,655A |
| Max Traction Motor (TM) Current | 885A |
| Max Continuous TM Current | 560A ⚠ |
| Traction Motor Type | DC (GEC G412BZ) |
| Factor Of Adhesion | 25% (1) |
| Transition Mode | Fully Automatic (2) |
| Transition Groups | 2, 2 |
| Transition Shunts | 1, 0.7 ⚠ |
| Alternator Transition | No |
| Traction Control | APR (3) |
| Dynamic Braking (DB) Mode (if used) | Electrically Driven Blowers |
| DB Max Current | 885A |
| DB Max Continuous Current | 560A ⚠ |
| Blended Braking | No |
| Miscellaneous | - |
|---|---|
| Head End Power (HEP) | No |
| HEP Consumption | N/A |
| HEP Stand By/Run Mode | N/A |
| Load Ramp Speed | 2A/Tick |
| TM Overload Protection | No |
| Starter Mode | Latched Prime, Manual Start |
| Air Brake Schedule | 26-L |
| Compressor CFM | 202.5cu-ft (WABCo 3CDC @ 900rpm) |
| Main Reservoir Volume | 32.4cu-ft ⚠ |
Notes
(1) The EE LWT bogies are optional. These raise the Factor Of Adhesion to 29%.
(2) Automatic w/ Selector could be specially ordered.
(3) APR + Sand is optional.